Picture
  • Model#: PK-2016/2016R
  • Name：VDV & USB Cable Tester
  • The VDV & USB cable tester is designed for testing today’s media computer networks which combination of telephone USOC (voice), twisted pair (data) and coax security / alarm (video) as well as PC-USB 2.0 3.0 cable.         more detail
Picture
  • Model #：PK-3456/3456E
  • Name：SPY SPLITPAIR
  • The SpySplitpair is designed for detecting the split pair to qualify data twisted pair (UTP / STP) cables.  The unit includes Full Test, one-ended test for split pair and shielding, Debug, and Tone modes as well as Voltage warning and Low battery indicators. more detail
Picture
  • Model #：PANTESTER PK-7890/7890R
  • Name：Multi Cable Tester
  • PANTESTER is an advanced multifunction pin-by-pin cable tester to verify cable integrity of Datacom.  Telecom and Coaxial cables and displays the test results on the main unit. more detail
Picture
  • Model #：PinMaster PK-2018/2020
  • Name：USB and Network Cable Tester
  • PK-2018/2020 has an easy-to-read light bars (TX/RX) for displaying test results on the main unit and 2 buttons used to access each function, it provides the necessary complete connectors to test the various cable types with no need for adapters and determines cable run length up to 300m and up to 4 cable locations by one operator at a time, makes testing accurate and more efficient. more detail
Picture
  • Model #：NEXTpro S2 PK-168
  • Name：LAN Cable Tester
  • NEXTpro S2 can solve all the Cable / Wire network and troubleshooting problems, made before and after installation quickly and easily.  Optional mini remote map/ID adapters set with RJ45 plug for fitting patch panel jack that used to test and determine unknow cabling  paths simultaneously by seeing which numbered plug is on the other end of the cable.  PK-168 also with voltage detection and warning functions to protect the tester. more detail
Picture
  • Model #：PinScope PK-2015
  • Name：HDMI Cable Tester Pro
  • The Pansco "PINSCOPE" tester is an advanced cable tester allows the fast and accurate verification both standard and custom HDMI cables, mapping continuity and proper configuration and displays 19 pins and shield connections status on the main unit. Using the unique Learn mode function enable the unit to learn, verify and test custom and production cables for PASS/ FAIL a snap. more detail
Picture
    
  • Model #：PinMaster PK-101
  • Name：Pro CABLE TESTER
  • PK101 is an innovative tester to perform full cabling testing, displaying  wiremap, cable ID, faults, toning and identify active network port on all common low-voltage cabling system in today's automated homes, network, telephone or video media, and determine cable run length up to 300 M.  more detail

Picture
  • Model #：One for All PH-400
  • Name：Network, Port ID and Cable Tester
  • The One For All is an all-in-one network tester, tone generator, cable tester, and port ID finder. It comes with a remote unit, allowing pin-by-pin tests of installed cables in addition to patch cables. The office ID feature allows the user to check the ID number of up to 100 networks or patch panel outlets without labeling the cables manually, and the tone generator traces cable using a tone detectable by any market tone probe. more detail
Picture
  • Model #：All Check Plus PR-50
  • Name：Network & Modular Cable Tester
  • The All-Check Plus is an all-purpose cable testing and tracing tool. Its twin units are plugged in at both ends of the cable. Pin-by-pin test results, cable type, and twist pair faults are displayed on both units. Both units can transmit or receive test signals. A built-in tone generator, when combined with any standard tone tracer, lets you send a signal on any pin or all pins, to quickly isolate and trace a cable to its destination. Automatic power off, battery low indicator. more detail

Picture
  • Model #：PR-608/608A
  • Name：Net Toner & Probe Kit
  • The Net Toner has the unique features of enhancing talk battery power supply to allow communication over inactive pairs, using telephone test sets.  It provides two able tones which allow you to trace cable and locate faults for troubleshooting both voice and data circuits.  It also tests cable continuity and can determine line 1 and line 2 polarity and voltage in data and voice lines. more detail
Picture
  • Model #：PR-60/60A
  • Name：Net Toner & Probe Kit
  • The Net Toner has the unique feature of enhancing talk battery power supply to allow communication over inactive pairs, using telephone test sets.  It provides two able tones which allow you to trace cable and locate faults for troubleshooting both voice and data circuits. more detail
Picture
  • Model #：PH-01
  • Name：LAN Check with Tone Generator
  • The LANCHECK consists of two modular units, a tester and a remote terminator.  The modular design enables the tester to be used for local loop-back testing of patch cable or remote testing of pre-installed premise wiring.  The LANCHECK makes it easy to recognize opens and shorts within a cable as well as identify reversed and miswired cables. more detail
Picture
  • Model #：PH-320/300
  • Name：Plug'N Check
  • The plug‵N′check is our easiest-to use cable tester yet.  Simply plug in both ends of a cable, and the easy-to-read LED display explains the cable type and checks whether cable is faulty or good automatically.  more detail
Picture
  • Model #：PR-09
  • Name：PC-NET Cable Tester
  • The PC-NET Cable Tester is a portable, stand-alone unit that provides an affordable way to quickly test PC, Network, Telco, Coax, USB and IEEE1394 cables for continuity and wiring configuration for any combination.  Open, shorts, miswires and cross-connected wires are detected immediately.  The interchangeable connectors boards offers flexibility and convenience easy to read LED instantly indicates good or faulty.  The tester is suitable for use by computer dealers and computer hardware outlets.
     more detail
Picture
  • Model #：PH-100/120
  • Name：LANTRACKER
  • The Lantracker is a network tester, pin-by-pin cable tester, and tone generator all in one. As a network tester, it detects whether a network is active or inactive and displays network speed (10/100/1000 Mbps) in either case. It also flashes the network hub or NIC’s port light corresponding to the cable it is connected to, to show the cable’s port number. more detail



Picture
  • Model #：PA-40
  • Name：Network Cable Tester
  • The PA-40 is designed to check both shielded and unshielded twisted pair (STP/UTP) and coaxial BNC-type network cables. With the push of a button, it tests all wires for continuity, miswiring, and polarization. Dual-colored LEDs let you identify correct and reversed pairs; using the included remote unit, cables may be tested before installation or after installation. Features tip/ring polarity test. Uses 1 9V battery.                    more detail